FAKULTAS TEKNOLOGI INDUSTRI

Jurnal Internasional 2014

  1. Rahayu, E.S., Samadhi, T.W., Subagjo, Gunawan, M.L., “Development of hydrocracking catalyst support from kaolin of indonesian origin”, Source of the Document Advanced Materials Research 896, pp. 532-536, 2014 (Scopus)
  2. Subagjo, S., Rahayu, E.S., Samadhi, T.W., Gunawan, M.L., Synthesis of NaY zeolite using mixed Calcined Kaolins, Journal of Engineering and Technological Sciences, Volume 47, Issue 6, 2015, Pages 633-639. Open Access (Scopus)
  3. Cempaka, L., Aliwarga, L., Purwo, S., Penia Kresnowati, M.T.A.,Dynamics of cocoa bean pulp degradation during cocoa bean fermentation: Effects of yeast starter culture addition”, Journal of Mathematical and Fundamental Sciences, 2014, 46 (1), pp. 14-25
  4. Khoiruddin, Hakim, A.N., Wenten, I.G., “Advances in electrodeionization technology for ionic separation-A review”, Membrane Water Treatment 5 (2), pp. 87-108
  5. Indarto, A., “Methanol synthesis from methane and oxygen with [Ga Cr]/Cu-Zn-Al catalyst in a dielectric barrier discharge”, Ionics, 20 (3), pp. 445-449
  6. Qirom, M., Indarto, A., Putrawan, I.A., “Case studies thermal analysis of HP condensate stabilizer column”, Applied Mechanics and Materials 493, pp. 27-32
  7. Sri Andayani, D.G., Sukandar, E.Y., Sukandar, U., Ketut Adnyana, I., “Isolation, identification of phenylacetic acid from Streptomyces galbusTP2 strain and its toxicity”, International Journal of Pharmacy and Pharmaceutical Sciences 6 (5), pp. 643-646
  8. Abidin, A.Z., Graha, H.P.R., “Morphological study of bacterial cellulose (BC) /polyvinil alcohol (PVA) nanocomposite as bone scaffold”, Advanced Materials Research 950, pp. 24-28
  9. Samadhi, T.W., Pratama, P.P., Muan, N., “Development of geopolymer utilizing inorganic waste materials”, Advanced Materials Research 896, pp. 553-556
  10. Daniel, L., Rasrendra, C.B., Kloekhorst, A., Broekhuis, A.A., Manurung, R., Heeres, H.J., “Application of metal triflate catalysts for the trans-esterification of Jatropha curcas L. oil with methanol and higher alcohols”, JAOCS, Journal of the American Oil Chemists’ Society,February 2014 ISSN:1558-9331 91 (2), pp. 325-336
  11. Elwina, Yunardi, Bindar, Y., Syukran, “Simulation of the influence of air preheat combustion on the temperature of propane turbulent flame using probability density function approach and eddy dissipation model”, Advanced Materials Research 871, pp. 95-100
  12. Hadisoebroto, R., Kamil, I.M., Notodarmojo, S., Bindar, Y., “Improving performance of water treatment on oxidation ditch using modification of reactor hydrodynamic”, Jurnal Teknologi (Sciences and Engineering) 69 (6), pp. 101-104
  13. Prabowo, W.A.E., Agusta, M.K., Nugraha, Subagjo, Lubis, A.H.c , Dipojono, H.K., “The investigation of the adsorption of thiophene on nimos surface: A density functional theory study”, Lecture Notes in Electrical Engineering 275 LNEE, pp. 25-39
  14. Refino, A.D., Agusta, M.K., Dipojono, H.K., Nugraha, “First principle study of hydrazine and OH- Co-adsorption on Ni(111) in high coverage system”, Advanced Materials Research 893, pp. 35-38
  15. Afifah, H., Tanuwijaya, V.V., Nugraha, Dipojono, H.K.,Lithium mobility in lithium-montmorillonite/poly(ethylene oxide) electrolytes: A molecular dynamics simulation study”, Advanced Materials Research893, pp. 834-837
  16. Ginting, L.Y., Agusta, M.K., Nugraha, Lubis, A.H., Dipojono, H.K., “Cr, Fe – doped anatase TiO2 photocatalyst: DFT+U investigation on band gap”, Advanced Materials Research 893, pp. 31-34
  17. Prabowo, W.A.E., Kemal Agusta, M., Nugraha, S., Lubis, A.H., Dipojono, H.K., Density functional theory study of the adsorption of thiophene on NiMoS surface, Lecture Notes in Engineering and Computer Science, 2203, pp. 794-797
  18. Lintangpradipto, M.N., Wungu, T.D.K., Lubis, A.H., Dipojono, H.K., Nugraha, “Density functional theory study: Interactions of lithium-montmorillonite with poly (ethylene oxide) as preliminary investigation of lithium polymer conductivity” Advanced Materials Research 893, pp. 790-793
  19. Sutrisno, Syamsudin, T.S., Alamsyah, E.M., Purwasasmita, B.S., “Synthesis of bio-based nanomaterial from surian (Toona sinensis roem) wood bark using conventional balls milling method and its characterization”, Journal of Biological Sciences Volume 14, Issue 3, 2014, Pages 204-212
  20. Yacoub, R.R. Bambang, R.T. Harsoyo, A. Sarwono, J., “DSP implementation of combined FIR-functional link neural network for active noise control”, International Journal of Artificial Intelligence 12 (1), pp. 36-47, 2014
  21. Abdullah, H. Ariyanto, N.P. Yuliarto, B. Asshaari, I. Omar, A. Razali, M.Z., “Influence of structural and chemical properties on electron transport in mesoporous ZnO-based dye-sensitized solar cell”, Ionics 2014
  22. Rusydi, F. Agusta, M.K. Saputro, A.G. Kasai, H., “A theoretical study of ligand effects on the electronic structures of ligated zinc porphyrin using density functional theory”, Journal of the Vacuum Society of Japan 57 (3), pp. 102-110
  23. Joelianto, E., “Finite horizon optimal hybrid reference control for improving transient response of feedback control systems”, International Journal of Systems Science 45 (9), pp. 1814-1829
  24. Rosyidi, C.N., Irianto, D., Cakravastia, A., Toha, I.S., Hamada, K., “Optimization models for deriving optimum target of key characteristics”, Journal of Advanced Manufacturing Systems 13 (2), pp. 89-101
  25. Widyanti, A., Sunaryo, I., Kumalasari, A.D., “Reducing the dependency on rice as staple food in Indonesia – A behavior intervention approach”, Journal of the International Society for Southeast Asian Agricultural Sciences 20 (1), pp. 93-103
  26. Fredriks, J.W.S., Pennink, B.J.W., Simatupang, T.M., Siswanto, J., “Modelling a technology push by using hybrid franchising”, International Journal of Entrepreneurship and Small Business 22 (1), pp. 64-88
  27. Isnaini, M.M., Shirase, K., “Review of computer-aided process planning systems for machining operation – Future development of a computer-aided process planning system”, Source of the Document International Journal of Automation Technology 8 (3), pp. 317-332
  28. Isnaini, M.M., Sato, R., Shirase, K., “Workpiece setup simulation based on machinable space of five-axis machining centers”, Procedia CIRP 14, pp. 257-262
  29. Aribowo, W., Terashima, K.,”Document Cubic spline trajectory planning and vibration suppression of semiconductor wafer transfer robot arm”, International Journal of Automation Technology 8 (2), pp. 265-274, 2014
  30. Istadi, I., Bindar, Y., “Improved cooler design of electric arc furnace refractory in mining industry using thermal analysis modeling and simulation”, Applied Thermal Engineering, Volume 73, Issue 1, 2014, Pages 1127-1138
  31. Bindar, Y., “New correlations for coal and biomass pyrolysis performances with coal-biomass type number and temperature”, Journal of Engineering and Technological Sciences, Volume 45 B, Issue 3, July 2014, Pages 275-293
  32. Subagjo, Budhi, Y.W., Effendy, M., Bindar, Y., “Homogeneity of continuum model of an unsteady state fixed bed reactor for lean CH4 oxidation”, Source of the Document Journal of Engineering and Technological Sciences, 46 B (2), pp. 195-210
  33. Akhmad Zainal Abidin, Tiara Puspasari  & Hafis Pratama Rendra Graha, “Utilization of Cassava Starch in Copolymerisation of Superabsorbent Polymer Composite (SAPC)”, Journal of Engineering and Technological Sciences, Vol. 46B No. 3, 2014, ISSN: 2337-5779, E-ISSN: 2338-5502
  34. Yogi W. Budhi, M. Effendy, Yazid Bindar & Subagjo, “Dynamic Behavior of Reverse Flow Reactor for Lean Methane Combustion”, Journal of Engineering and Technological Sciences, Vol. 46B No. 3, , Pages 299-317, 2014,  ISSN: 2337-5779, E-ISSN: 2338-5502 (Scopus)
  35. Yohannes S.M. Simamora, Harijono A. Tjokronegoro & Edi Leksono, “On Active Surge Control of Compression Systems via Characteristic Linearization and Model Nonlinearity Cancellation”, Journal of Engineering and Technological Sciences, Vol. 46B No. 3, 2014, ISSN: 2337-5779, E-ISSN: 2338-5502
  36. Kresnowati, M.T.A.P., Bindar, Y., Aliwarga, L., Lestari, D., Prasetya, N., Tanujaya, A.R., “Effects of retting media circulation and temperature on the fermentation process in soft-texture and low cyanogenic content cassava flour production“, ASEAN Journal of Chemical Engineering, 14 (2), pp. 67-75
  37. Abdullah Nur Aziz, Yul Yunazwin Nazaruddin, Parsaulian Siregar & Yazid Bindar, “Structured Mathematical Modeling of Industrial Boiler”, Journal of Engineering and Technological Sciences, Vol. 46B No. 1, 2014, ISSN: 2337-5779, E-ISSN: 2338-5502
  38. Joko Siswanto, Anton Satria Prabuwono & Azizi Abdullah, “Volume Measurement Algorithm for Food Product with Irregular Shape using Computer Vision based on Monte Carlo Method”, Journal of ICT Research and Applications,  Journal Vol. 8C No. 1, 2014, ISSN: 2337-5787, E-ISSN: 2338-5499
  39. Antonius Indarto, “Density functional theory study of the interaction of vnyl radical, ethyne, and ethene with benzene, aimed to define an affordable computational level to investigate stability trends in large va der Waals complexes”, The Journal of Chemical Physics 139, 244306
  40. Brian Yuliarto, “Fabrications of NO Gas Sensors Based on ZnO Nanorod Thin Films”, International Journal of Materials Science and Engineering
  41. I. Gede Wenten, “Membrane Module design and dynamic shear-induced techniques to enhance liquid separation by hollow fiber modules: a review”, Desalination and Water Treatment 2014
  42. I. Gede Wenten, “Influence of Additives on Polysulfone-Based Ultrafiltration Membrane Performance during Peat Water Filtration”, Jounal of Water Sustainabilty 2014
  43. Rajesri Govindaraju, Hariadi, R.A.R.,“A Study on ERP Assimilation and Benefit Realisation based on Diffusion of Innovation Theory”, ARPN Journal of Engineering and Applied Sciences, 9 (9), pp. 1409-1416
  44. Rajesri Govindaraju, Hariadi, R.A.R., “Multi-echelon Production System Planning: case study at a steel manufacturing company”, Advanced Materials Research 2014, 980, pp. 237-242
  45. Rajesri Govindaraju, Kristianto Lukman, Dissa R. Chandra, “Manufacturing Execution Systems Design using ISA-95”, Advanced Materials Research 2014, 980, pp. 248-252.
  46. Iqbal, M., Marintan, E., Septiani, N.L.W.,  Suyatman, A. Nuruddin ,Nugraha, Yuliarto, B.,  “Synthesis and Harmful Gas Sensing Properties of Zinc Oxide Modified Multi-Walled Carbon Nanotubes Composites, Advanced Materials Research“, Vols. 1044-1045, pp. 172-175, Oct. 2014.
  47. Prima, E.C., Yuliarto, B., Suendo, V.,Suyatman, “Improving photochemical properties of Ipomea pescaprae, Imperata cylindrica (L.), Beauv, and Paspalum Conjugatum Berg as photosensitizers for dye sensitized solar cells, Journal of Materials Science”: Materials in Electronics, October 2014, Volume 25, Issue 10, pp 4603-4611.
  48. Kusmaningrum Soemadi, Bermawi P. Iskandar & Harsono Taroepratjeka, “Optimal Overhaul-Replacement Policies For a Repairable Machine Sold with Warranty”, Journal of Engineering and Technological Sciences, Journal Vol. 46B No. 4, 2014
  49. Khoiruddin, I. N. Widiasa, I.G. Wenten, “Removal of inorganic contaminants in sugar refining process using electrodeionization”, Journal of Food Engineering 133, pp. 40-45 (Impact Factor: 2.58). 07/2014  (Scopus)
  50. Handy, H., Santoso, A., Widodo, A., Soerawidjaja, T.H., Indarto, A., H2S–CO2Separation Using Room Temperature Ionic Liquid [BMIM][Br]”, Separation Science and Technology (Philadelphia)2014
  51. Joko Siswanto, Sribagjawati Suparman, Iman Sudirman, Sukoyo, Made Andriani, “Charateristics of Business System Requirement for Creative Industries SME’s in Bandung“, International Journal of Applied Engineering Research (IJAER), 2014.
  52. Mahfudz, Iman Sudirman, Joko Siswanto, Budhi Prihartono, “Measurement of Public Service Motivation: A Case in Central Java Province, Indonesia”, International Journal of Applied Engineering Research (IJAER), , 9 (22), pp. 17895-17902, January 2014.
  53. Wulandari, W., Brooks, G.A., Rhamdhani, M.A., Monaghan, B.J., “Kinetic analysis of silicothermic process under flowing argon atmosphere”, Canadian Metallurgical Quarterly, 2014,  53 (1), pp. 17-25 (Scopus).
  54. Siswanto, J., Suparman, S., Sudirman, I., Sukoyo, Andriani, M., “Characteristics of business system requirement for creative industries SME’s in Bandung”, International Journal of Applied Engineering Research, 9 (22), pp. 17921-17927, 2014
  55. Mardawati, E., Werner, A., Bley, T., Kresnowati, M., Setiadi, T., “The enzymatic hydrolysis of oil palm empty fruit bunches to xylose”, Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 93 (10), pp. 973-978, 2014
  56. Yenyen Maryeni, Rajesri Govindaraju, Budhi Prihartono, Iman Sudirman, “e-Commerce adoption by Indonesian SMEs“, Australian Journal of Basic and Applied Science, 8 (14) Special 2014, Pages: 45-49.
  57. Rajesri Govindaraju, Virgine Ayu Octarika, Tota Simatupang, “The Development of a Model on EMR Implementation Readiness: a Clinician Perspective“, Australian Journal of Basic and Applied Science, 8(14) Special 2014, Pages: 27-33.
  58. Ina Ratnamiasih, Rajesri Govindaraju, Budhi Prihartono, Iman Sudirman, The Influence of Leadhership and Organizational Control on Hospital Service Quality, AENSI Journals, Australian Journal of Basic and Applied Sciences,  8(14) Special 2014, Pages: 40-44
  59. Ou-Yang, C., Ansari, R., and Hidayat, Y.A., The Hierarchical Facility Location Problem: A Hybrid Particle Swarm Optimization–Tabu Search Algorithm. International Journal of Production Research. Submitted and under review (manuscript number: TPRS-2014-IJPR-1497).