Enter your keyword

Prosiding Internasional 2011

  1. Jenny Rizkiana, Yogi W. Budhi, Azis Trianto, “Simulation and Optimization of Coupling Reaction of Methanol Synthesis and Isopropyl Alcohol Dehydrogenation”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  2. Tjokorde W. Samadhi, Kevin R. Lismana, Subagjo, “Characterization of ?-Alumina Catalyst Support Prepared from Belitung Kaolin”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  3. Vita Wonoputri, Yogi Wibisono Budhi, Subagjo, “Determining Rate Parameters of Langmuir-Hinselwood Type Kinetics for Methane Oxidation Over Pt/?-Al2O3 in A Fixed Bed Reactor”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  4. M.T.A. Penia Kresnowati, M.K. Danquah, X.D. Chen, “Development of Bioreactor for Stem Cell Applications: Measuring Stem Cell Concentration in Bioreactor”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  5. Mubiar Purwasasmita, “Intensifikasi Proses Tanaman Meningkatkan Produktivitas dan Kualitas Produk Tanaman dengan Pengembangan Bioreaktor Tanaman”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  6. Phelia, Gilang Hardadi, Yogi WibisonoBudhi, Yazid Bindar, “Determination of Kinetic Rate of n-Hexane Oxidation Over Pt/????-Al2O3 in A Fixed Bed Reactor”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  7. Hyung Woo Lee, Yook Chan Kim, Johnner P. Sitompul, “An Experience of Scaling-up Paste Glue Production for Gummed Tape from Laboratory Scale Experimental Data”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  8. Rudy Winarto, Tri Partono Adhi, “Dynamic Simulation of Anti Surge Control for Two Stage Centrifugal Gas Compressor”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  9. Ukan Sukandar, Stephanie Liana Utami Sutoko, Elizabeth Valentin, “Optimization of Production Penicillin Acylase by Escherichia Coli”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  10. Kinan Adhitya Kusumah, Estiyanti Ekawati, Sutanto Hadisupadmo, “Supply Chain Modeling and Control System Design of Fuel Oil Transfer Through Pipeline”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  11. Maria Ulfah, Subagjo, “Kinetics of Hydrodesulfurization Dibenzothiophene Using NiMo / ?-Al2O3 Catalyst”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  12. Martha Aznury, Azis Trianto, Adi Pancoro, Tjandra Setiadi, “Effect of Feeding Time of Volatile Fatty Acids from Palm Oil Mill Effluent (POME) on Polyhydroxyalkanoate Production by Ralstonia eutropha JM 134”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  13. Andreas Yoppy Aprianto Prasetya, Isdiriayani Nurdin, “Corrosion of Aluminum in Citric Acid Solution”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  14. Akhmad Z. Abidin, A.Vachlepi, “Natural Rubber Powder Production from Latex: Process and Equipment Design (Spray Dryer Chamber) for Latex Drying”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  15. Akhmad Z. Abidin, N. M. Truly Pinanti Sastra, and G. Susanto, “Synthesis and Characterization of Cellulose Based Superabsorbent Polymer Composites”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  16. P. Teta Prihartini Aryanti, I Gede Wenten, “Improvement of Selectivity and Permeation Properties of Ultrafiltration Membrane for Humic Acid Water Treatment : A Review”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  17. Akhmad Z. Abidin, N. M. Truly Pinanti Sastra, G. Susanto, “Synthesis and Characterization of Sodium Lignosulfonat”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  18. Heru Hermawan, Bambang Sunendar, “Influences of Chitosan Addition to Morphology of Yttrium Stabilized Zircona (YSZ) Nanoparticle for Dental Bridge Application”, Proceedings of The 1st International Conference on Materials Engineering (ICME) and 3rd AUN/SEED-Net Regional Conference on Materials (RCM) – UGM Yogyakarta, 2-3 February 2011
  19. Khoiruddin, I Gede Wenten, “Recent Development and Potential Applications of Electrodeionization (EDI)”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  20. P. D. Sutrisna, F. S. Lingganingrum, I Gede Wenten, “Performance of Slotted Pore Microfiltration Membrane to Separate Oil from Water”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  21. Tjokorde W. Samadhi, Toshihiro Hirotsu, Shinichi Goto, “Measurement of Auto-Oxidation Kinetics of Methyl Oleate – Methyl Laurate Mixture as a Model Biodiesel System”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  22. Syamsudin, Herri Susanto, “Drying and Pyrolysis of Kraft Pulp Mill Sludge Cake”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011
  23. Anang Satria Chandranegara, I Gede Wenten, “CFD Turbulence Model of Tangential Cylindrical Cyclone for Droplets Removal from Gas Streams”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011,
  24. Suhartono, Herri Susanto, Dwiwahju Sasongko, Azis Trianto, “Characteristic of Gas-Liquid Contactor for Absorption of Toluene Using Oils”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011,
  25. Hendriyana, Suhartono, Herri Susanto, “Vapour-Liquid Equilibrium Study for Benzene and Several Types of Oil as Absorbent”, International Seminar on Chemical Engineering – Soehadi Reksowardojo 2011,
  26. H. Husniah, U.S. Pasaribu, A. H. Halim, Bermawi P. Iskandar, “A Maintenance Service Contract for A Warranted Product”, The IEEE Proceeding 2011 International Conference on Industrial Engineering and Engineering Management
  27. Iftikar Z. Sutalaksana, Manik Mahachandra, “Effect of auditory response test on Indonesian drivers’ alertness” IMECS 2011 – International Multi Conference of Engineers and Computer Scientists 2011
  28. Rajesri Govindaraju, Chandra, D.R., “E-commerce adoption by Indonesian small, medium, and micro enterprises (SMMEs): Analysis of goals and barriers”, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011
  29. Wiradanti, B., Rajesri Govindaraju, “Requirements engineering maturity measurement and evaluation (A case study of Bank X in Indonesia)”, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011
  30. Rajesri Govindaraju, Laras Ayu Pramesti, “Information Architecture for Online Review System”, IEEE International Conference on Industrial Engineering and Engineering Management 2011
  31. Firdaus, O.M., Kadarsah Suryadi, Rajesri Govindaraju, T.M.A. Ari Samadhi, “Medical Knowledge Sharing Guideline: a conceptual model”, IEEE International Conference on ICT and Knowledge Engineering
  32. Deddy Kurniadi, Mohammad Rohmanuddin and Anton Maulana, “Fuzzy Assisted Parameter Selection Rule in Regularized Newton Algorithm of Electrical Impedance Tomography”, 2011 International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering, 8-9 November 2011, Bandung, Indonesia
  33. Hardianto Iridiastadi, “Indonesian railway accidents – utilizing Human Factors Analysis and Classification System in determining potential contributing factors
  34. Mohammad Rohmanuddin, Eko Mursito Budi, Rakhmadian Purnama, “Design of Horizontal Seismic Sensor with Spherical Inverted Pendulum and Magnetic Levitation”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  35. Noorma Yulia Megawati, Salmah, Indah Emilia Wijayanti, Endra Joelianto, “Safety Analysis of Linear System with SOS for Complex Eigenvalues”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  36. Endra Joelianto, Iqbal Ginanjar Prasetia, “Bake Plate Control using A Robust Multiplexed Model Predictive Control (RMMPC)”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  37. Endra Joelianto, Aan Setiawan, Diah Chaerani, “Hardware in the Loop Simulation of Railway Traffic Re-scheduling by Means of MILP Algorithm”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  38. Salmah, Solikhatun, Noorma Yulia Megawati, Endra Joelianto, Agus Budiyono, “Robust Switched Linear Controller for Multimode HelicopterModels”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  39. Endra Joelianto, Deddy Candra Anura, “Transient Response Improvement of PID Controller using ANFIS–Hybrid Reference Control”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  40. Farida I.M., Suprijanto, Gunawan Ismail, Hesty Susanti, Maria E Prasetio, “Observation of Acupuncture Stimulation on Human Stamina Improvement using EMG”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  41. Endra Joelianto, “Networked Control Systems: Time Delays and Robust Control Design Issues”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  42. Mohammad Rohmanuddin, Eko Mursito Budi, Fikri Ferdiana, “Development of Seismic Sensor Application Using Micro Electromechanical Systems”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  43. Muh. Salehuddin, Suprijanto, Farida I. Muchtadi, “Prototype Design of Low Cost Four Channels Digital Electroencephalograph for Sleep Monitoring”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  44. Suprijanto, A. Rakhmawati, Endang Juliastuti, “Compact Computer Vision for Black Tea Quality Evaluation Based on The Black Tea Particles”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  45. Augie Widyotriatmo, A. K. Pamosoaji, G.-Y. Hong, Keum-Shik Hong, “Control Architecture of Material Handling Vehicles”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  46. Beni Kusuma Atmaja, Endra Joelianto, “Surface Control Design of Rocket using MIMO PID Robust Integral Backstepping”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  47. K. Ain, Deddy Kurniadi, A. Trisnobudi, O. Santoso, “Summation Convolution Filtered Back Projection and Algebraic Reconstruction Technique for Ring Array Ultrasound Tomography Based on Time of Flight”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  48. Anugrah Sabdono Sudarsono, Suprijanto, Renata Amelia, Joko Sarwono, “Wavelet Denoising to Analyze Electroencephalogram Signal of Perfect Pitch and Non Perfect Pitch Subjects”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  49. Febi Rhiana, Joko Sarwono, FX Nugroho Soelami, “Simulation and Analysis of Acoustical Comfort in an Intensive Care Unit”, 2011 2nd International Conference on Instrumentation, Control and Automation, 15-17 November 2011, Bandung, Indonesia
  50. Soenaryo, I., Ari Widyanti, & El Akbar, R., “Observing performance of Indonesian shift worker from the view of mental workload and chronotype“, Asia Pacific Conference on Industrial Engineering and Management System (APIEMS), Beijing, China. 15-17 October 2011.
  51. Putri, N.T., Yusof, S.M., and Drajad Irianto, “Self Assessment of Quality Engineering Practices in Malaysia and Indonesia Automotive Related Companies“, Proceedings the 12th APIEMS Conference, 2011. ISBN:978-979-18925-0-6.
  52. Endra Joelianto and A. Qurthobi, “Optimal Control Design for A Formation Tracking with Leader-Follower Concept of Multi-Agent Autonomous Helicopter Model“, 7th Inter. Confer. On Intelligent Unmanned Systems (ICIUS), Chiba, Japan, 2011
  53. Endra Joelianto, D. Hartono, A. Budiyono, Salmah, and I.E. Wijayanti, “Autonomous Helicopter Model Flight Using Robust H2-Type Switching Control“, 7th Inter. Confer. On Intelligent Unmanned Systems (ICIUS), Chiba, Japan, 2011
  54. Hasrini Sari, Firmanzah, “Segmentation for Environmental Friendly Products and Its Implication to Product Design”, Proceeding IEEE 2011, International Summer Conference of Asia Pacific Business Innovation and Technology Management, July 2011, Dalian – China
  55. Hasrini Sari , “Typology of Green Companies in Indonesia”, Proceedings 10th Asia Pacific Roundtable Consumption and Production, 9 – 11 November 2011, Yogyakarta – Indonesia
  56. Hermawan Judawisastra, Jamillah B. A. Nordin, Bambang Sunendar, “Influences of Chitosan Molecular weight on Adhesive and Bioactivity Properties of Ti-6Al-4V Coating”, Proceedings of The 1st International Conference on Materials Engineering (ICME) and 3rd AUN/SEED-Net Regional Conference on Materials (RCM) – UGM Yogyakarta, 2-3 February 2011
  57. Rajesri Govindaraju, Dipta Mahardhika, “Web-Based Decision Support System Using C4.5 Decision Tree Algorithm”, IEEE International Conference on Advance Computer Science and Information Systems, 17-18 Desember 2011, Jakarta.
  58. Firdaus, O.M., Suryadi, K., Govindaraju, R., Ari Samadhi, T.M.A., “Medical Knowledge Sharing of Physician on Medical Record”, International Seminar on Business and Management (ICONF 2011), Bandung, 27-28 April 2011
  59. Singgih Saptadi, Rajesri Govindaraju, TMA Ari Samadi, Iman Sudirman, “Internet Adoption and Business-Information Technology Alignment in Indonesia SMEs: A Literature Review”, International Seminar on Business and Management (ICONF 2011), Bandung, 27-28 April 2011
  60. Febi Rhiana, Joko Sarwono, FX Nugroho Soelami, “Acoustic Analisys of High Care Unit (HCU) at Hospital “X” in Bandung, Indonesia”, The 2nd International Conference on Instrumentation, Communication, Information Technology, and Biomedical Engineering 2011, paper 72
  61. W. Sutopo, Senator Nur Bahagia, Andi Cakravastia, T.M.A. Ari Samadhi, “A Buffer Stock Model to Ensure Stabilization and Availability of Seasonal Staple Food by Empowering Producer Using Warehouse Receipt System”, International Conference on Industrial Engineering and Engineering Management 2011, Singapore, December 2011, pp 985-989, ISBN 978-1-4577-0739-1.
  62. Tanika D Sofianti, Kadarsah Suryadi, Rajesri Govindaraju, Budhi Prihartono, Hiroshi Katayama, Arief R Setiawan, “Performance Measurement of Customer Knowledge Co-creation in New Product Development: an application of Data Envelopment Analysis”, Proceeding of the 12th International Conference on QiR (Quality in Research) Bali, Indonesia, 4-7 July 2011 ISSN 114-1284
  63. Syamsudin, Herri Susanto, “A Preliminary Study on Gasification of Sludge Cake to Produce Medium Heating Value Gas”, 18th Regional Symposium on Chemical Engineering 2011, 27 – 28 October 2011, Ho Chi Minh, Vietnam
  64. Tirto Prakoso, Ummul Khair, “Esterification of Palm Fatty Acid Distillate With Ethanol”, 18th Regional Symposium on Chemical Engineering 2011, 27 – 28 October 2011, Ho Chi Minh, Vietnam
  65. Yosi Agustina Hidayat, I. D. Anna, A. Khrisnadewi, ”The Application of Vendor Managed Inventory in the Supply Chain Inventory Model with Probabilistic Demand”, IEEM Singapore 2011 IEEE
  66. A.A. GERRY, A. NURUDDIN, “Effect of Calcination Temperatures on the Properties of Dip-Coated Barium Ferrite Thin Films”, Proceeding of the 1st International Conference on Materials Engineering (ICME) and 3rd AUN/SEED-Net Regional Conference on Materials (RCM) 2-3, February 2011, Universitas Gadjah Mada, Yogyakarta, Indonesia, pp. 483-485.
  67. A. NURUDDIN, R. RIADY, SUYATMAN, “Microwave Induced Irradiation of Barium Ferrite Prepared by Sol-gel Auto-combustion”, Proceeding of the 1st International Conference on Materials Engineering (ICME) and 3rd AUN/SEED-Net Regional Conference on Materials (RCM) 2-3, February 2011, Universitas Gadjah Mada, Yogyakarta, Indonesia, pp. 495-498
  68. Sri Julia, Ahmad Nururddin, Suyatman, Nugraha, and Brian Yuliarto, “Ethanol Sensing Properties of Nanosheets ZnO Thin Films Prepared by Chemical Bath Deposition”, AIP Conference Proceeding of the the 4th Nanoscience and Nanotechnology Symposium (NNS2011), International Symposium, Bali, Indonesia, 23–25 September 2011, Vol. 1415, pp. 205-208.
  69. Lukman Nulhakim, Nugraha, Ahmad Nuruddin, Suyatman, and Brian Yuliarto, “Al‐ doped ZnO Thin Films for Ethanol Sensors”, AIP Conference Proceeding of the the 4th Nanoscience and Nanotechnology Symposium (NNS2011), International Symposium, Bali, Indonesia, 23–25 September 2011, Vol. 1415, pp. 227 – 230
  70. Aditia Rifai, Muhammad Iqbal, Nugraha, Ahmad Nuruddin, Suyatman, and Brian Yuliarto, “Synthesis and Characterization of SnO2 Thin Films by Chemical Bath Deposition”, AIP Conference Proceeding of the the 4th Nanoscience and Nanotechnology Symposium (NNS2011), International Symposium, Bali, Indonesia, 23–25 September 2011, Vol. 1415, pp. 231-233
  71. Budhi Prihartono, “Business Risk Identification and Analysis of Pro-duction Unit of a State-Owned Military Manufac-turing Company using Failure Mode and Effect Analysis (FMEA)”, Proceeding of Industrial Engineering and Service Science , 2011, September 20-21
  72. Hendro Risdianto, Elis Sofianti, Suraya, Sri H. Suhardi, Tjandra Setiadi, “The Influence of Carbon Sources on Laccase Production by White Rot Fungus Marasmius Sp. In Solid State Fermentation”, Proceedings of 18th Regional Symposium on Chemical Engineering 2011
  73. Tjokorde Walmiki Samadhi, Utjok W. R. Siagian, Angga P. Budiono, “Simulation of Miscibility Development Between Oil and Flare Gas for Enhanced Oil Recovery
  74. Iwan Ridwan, Danu Ariono, “Mass Transfer Model in Packed Extraction Column with Droplet Size Distribution”, Proceedings of 18th Regional Symposium on Chemical Engineering 2011
  75. T. A. Ferdian, A. Reza, Tjandra Setiadi, “Evaluation of Laboratory and Plant Scale Membrane Bioreactors in Treating Textile Wastewater”, Proceeding The 4th IWA-ASPIRE Conference and Exibition, 2 – 6 October 2011, Tokyo, Japan.
  76. Hendro Risdianto, Elis Sofianti, Sri Harjati Suhardi, Tjandra Setiadi, “Optimisation of Laccase Production using White Rot Fungi and Agriculture Wastes in Solid State Fermentation”, Proceeding of 4th Environmental Technology and Management Conference 2011 (ETMC 2011). Bandung 3-4 November 2011
  77. Billy Andreas, Ilona S. Horvath, Khamdan Cahyari, Tjandra Setiadi, “Effects of Acid-Pretreatment of Inoculums and Substrate Concentration for Batch Thermophilic Biohydrogen Production from Starch-Rich Synthetic Wastewater”, lnternational Symposium on Southeast Asian Water Environment, Vol.9, 2011 (Part l)
  78. Hendro Risdianto, Sri Harjati Suhardi, Tjandra Setiadi, “The Influence of Temperature on Laccase Production in Solid State Fermentation by using White Rot Fungus Marasmius sp.”, The 4th AUN/SEED-Net Regional Conference on Global Environment and Seminar of NRCT- JSPS Asian Core Program
  79. Rety Setyawaty, Tjandra Setiadi, Keiko Katayama-Hirayama, Hidehiro Kaneko, and Kimiaki Hirayama, “Polyhydroxyalkanoate (PHA) Production from Tapioca Industrial Wastewater Treatment: Operating Conditions and Influence on PHA Content”, Proceeding The 4th IWA-ASPIRE Conference and Exibition, 2 – 6 October 2011, Tokyo, Japan. (Best Poster Award)
  80. Martha Aznury, Azis Trianto, Adi Pancoro, Tjandra Setiadi, “Efect Time of Feeding Volatile Fatty Acids from Palm Oil Mill Effluent (POME) to Production of Polyhydroxyalkanoat (PHA) by Ralstonia eutropha”, International Seminar on Chemical Engineering. Soehadi Reksowardojo 2011, Bandung, 5-7 October 2011