Enter your keyword

Prosiding Internasional 2014

  1. Hardianto Iridiastadi and Ani Umyati, “Train Accident at Level Crossing in Indonesia – A Preliminary Study”, Proceedings of the 5th International on Applied Human Factors and Ergonimics (AHFE) 2014, Krakow, Poland 19-23 July 2014
  2. Maya Arlini Puspasari, and Hardianto Iridiastadi, “Variables as Real-time Monitoring for Driving”, Joint International Conference APCHI-Ergofuture-PEI-IAIFI 2014, Udayana University, Denpasar-Bali-Indonesia, October 22-25, 2014
  3. Docki Saraswati, Andi CakravastiaBermawi P. Iskandar, dan Abdul Hakim Halim, “A Single Manufacturer – A Single Buyer Partnership with Vendor Maged Inventory and Consignment”, Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, January 7-9, 2014
  4. Endang Prasetyaningsih, SuprayogiTMA Ari SamadhiAbdul Hakim Halim, “Model of Integrated Production and Delivery Bach Scheduling Under JIT Environment to Minimize Inventory Cost”, Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, January 7-9, 2014
  5. Rinto Yusriski, SukoyoTMA Ari Samadhi and Abdul Hakim Halim, “Batch Scheduling for Single Deteriorating Machine to Minimize Total Actual Flow Time”, Proceedings of the 2014 International Conference on Industrial Engineering and and Operations Management, Bali, Indonesia, January 7-9, 2014
  6. A.Z. Abidin and H.P.R. Graha, “Novel Biocompatible Hydrogel for Lower Critical Solution Temperature (LCST) Near Body Temperature”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  7. A.Z. AbidinY. Bindar and A. Vachlepi, “Performance Test of Spray Dryer Design for Natural Rubber Powder Production Using CFD Simulation”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  8. Dianika Lestari, M. Insanu, Widyarani, Susan C.M.Witte-van Dijk, Wilhelmus J. Mulder, Johan P.M. Sanders, Marieke E. Bruins, “Optimizing Jatropha Press Cake Detoxification to Reduce Production Cost in Jatrophabiorefinery”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  9. Anisah.H, Hardianto Iridiastadi, Zulfa Fitri Ikatrinasari,”Static Back Strength-A Studi Among Young Adults”, Proceeding the 7th International Seminar on Indusstrial Engineering and Management (7th ISIEM). ISSN : 1978-774X, Sanur Paradise Hotel Bali, Indonesia, March 11th – 13th, 2014, Hal. ER-25-ER-30
  10. Rida Zuraida, Hardianto Iridiastadi, “Psychomotor Vigilance Task As A Measure of Performance-Based Fatique”, Proceeding the 7th International Seminar on Indusstrial Engineering and Management (7th ISIEM). ISSN : 1978-774X, Sanur Paradise Hotel Bali, Indonesia, March 11th-13th, 2014, Hal. ER-53-ER-57
  11. Manik MahachandraAri WidyantiHerman R. Soetisna, “Key Body Dimensions of Indonesian Children for Determining Standard Clothing Size”, Joint International Conference APCHII-ERGOFUTURE-PEI-IAIFI, Bali, October 22-25, 2014
  12. Estiyanti EkawatiEko Mursito BudiArdhana PutraManik MahachandraAugie Widyotriatmo, “Angklung Inspired Engineering Design Course”,International Conference on Advances in Education Technology (ICAET 2014), Bandung
  13. Amelia Panca, Devina Jonathan, Dwiwahju Sasongko, Winny Wulandari, “Utilization of Fly Ash from Coal Fired Power Plant for Zeolite Synthesis”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  14. Yusi Prasetyaningsih, Hendriyana, Herri Susanto, “Preparation and Testing of Cu/ZnO Catalyst for Methanol Synthesis”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  15. Endang Sri Rahayu, SubagjoTjokorde Walmiki SamadhiMelia Laniwati Gunawan, “Preparation of a Hydrocracking Catalyst by Combining The Components of Zeolite Y from Kaolin, Amorphous Silica Alumina and NiMo Active Metals”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  16. Yuono, David Bahrin, Subagjo and Herri Susanto, “Measurement of SO2 Adsoption Capacity of CuO/?-A2lO3 Prepared using Dry Impregnation”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  17. Muh Ashadi Cangara, Tjokorde Walmiki SamadhiIsdiriayani Nurdin & Hary Devianto, “Corrosion Database Development”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  18. Anna Sonya Asoka, Listiani Artha, Isdiriayani Nurdin, and Hary Devianto, “The Effect of Tannin on Carbon Steel Corrosion in Nitric Acid Solution”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  19. Daniel Prasetyo, Dwiwahju Sasongko, and Winny Wulandari, “Modelling and Simulation of Coal Gasification Using ASPEN PLUS”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  20. Abdurrahman Fadhlil Halim Luthan, Dwiwahju Sasongko, and Winny Wulandari, “Process modelling of two-steps dimethyl ether synthesis from Berau coal by indirect coal liquefaction”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  21. Firra Ghassani Gumilar, Kenita Firsa Ramadani, Tjokorde Walmiki Samadhi, and Winny Wulandari, “Thermal Characteristic of Coal and Biomass Ash”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  22. Irawan.A , Kurniawan.T, and Bindar. Y, “Modelling of Blast Furnace to Quantify The Influence of the Coke Quality on Iron Oxide Reduction Process”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  23. Irawan. A and Bindar. Y, “Effects of Burner Rearrangement on Fuel Consumption in  Steel Stock Reheating Furnace”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  24. Megarini Hersaputri, Estiyanti Ekawati, and Augie Widyotriatmo, “Control Structure Design on High Purity Binary Distillation Columns at Olefin Petrochemical Plant”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  25. Megarini Hersaputri, Estiyanti Ekawati, and Augie Widyotriatmo, “Modeling and Simulation of High Purity Binary Distillation Columns At Olefin Petrochemical Plant”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  26. Tri Partono Adhi, Moch. Syahrir Isdiawan B., and Budianto Setiawan W., “Dynamic Process Simulation of BOG Handling on LNG Storage Facility”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  27. Rizki Insyani, Hyung W. Lee, IGBN Makertiharta, and Johnner P. Sitompul, “Improving of Poly(L-Lactic Acid) Properties by Solution Blending of Biodegradable Polymers”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  28. Tirto Prakoso, Addin Akbar, “Effect Pericarp Extract Of The Mangosteen For Oxidation Stability Of Palm Oil, Jatropha Oil And Soybean Oil Biodiesel”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  29. Anto Tri Sugiarto, Rini Permanawati, and Tirto Prakoso, “Bleed water treatment using non-thermal plasma method”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  30. Zen Zen Muttakin, Hasan Hidayattuloh, and Yazid Bindar, “Bio-Char Production in A Two Chamber Pyrolysis Furnace From Biomass of Breadfruit Tree”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  31. Galih Okta, Ramavi Akbar, Yogi Wibisono BudhiIrwan Noezar, Manabu Miyamoto, and Shigeyuki Uemiya, “Preparation and Characterization of Pd/?-Al2O3 Membrane for Hydrogen Separation”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  32. Ramavi Akbar, Galih Okta, Yogi Wibisono BudhiIrwan Noezar, Manabu Miyamoto, and Shigeyuki Uemiya, “Dynamic Behavior of Hydrogen Permeation through Pd/?-Al2O3 Membrane during Natural Hot-run Start-up”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  33. Efri Mardawati, Ronny PurwadiMTAP Kresnowati, and Tjandra Setiadi, “Optimization and Kinetic Modelling of The Enzymatic Hydrolysis of Oil Palm Empty Fruit Bunch Using Crude Fungal Xylanase“, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  34. Awalina, Fachmijany Sulawesty, Eka Oktariani, Tjandra Chrismadha, Ika Atman Satya, Eki Naidida and Tjandra Setiadi, “Freshwater Phytoplankton as Potential Heavy metal Biosorbent and its Natural Aquatic Physico-Chemical Caracteristics:A Study Case on Situ Rawa Kalong- Depok”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  35. Fuji Permata Sari and Yogi Wibisono Budhi, “Modelling and Simulation of Pilot-Scale Reverse Flow Reactor for Oxidation of Gasoline Vapor”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  36. Tirto Prakoso, Meiti Pratiwi, and Tatang H. Soerawidjaja, “Oxidation Stability of Candle Nut Biodiesel Blends with Petro-Diesel in High and Low Sulphur Content”, (CHEMMPRO 2014) International Seminar on Chemical Engineering in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo (STKSR) 2014, Bandung, Indonesia, 30-31 October 2014
  37. Solehudin, A., Nurdin, I., “Study of benzotriazole as corrosion inhibitors of carbon steel in chloride solution containing hydrogen sulfide using electrochemical impedance spectroscopy (EIS)”, AIP Conference Proceedings 1589, pp. 164-168
  38. Nadhira, V., Kurniadi, D.Juliastuti, E., Sutiswan, A., “Study of continuous-wave domain fluorescence diffuse optical tomography for quality control on agricultural produce”, AIP Conference Proceedings 1589, pp. 276-280
  39. Ramadhani, M.F., Pasaribu, M.A.H., Yuliarto, B., Nugraha, “Fabrication of ZnO Nanorod Using Spray-Pyrolysis and Chemical Bath Deposition Method“, AIP Conference Proceedings, 1586, pp. 74-77, 2014
  40. Sarwono, Joko , Prasetiyo, I , Andreas, S , William, A, “The Design of MPP and its Application to Enhance the Acoustics of a Real Auditorium”, Internoise 2014, 43rd International Congress on Noise Control Engineering November 16-19, 2014, Melbourne, Australia
  41. Sarwono, Joko, Rachman, Arinda Puspita, Azzahra, Iva R Nisa, Utami, Sentagi Sesotya, “The Influence of Abfusor Configuration to the Speech Privacy and Intelligibility in an Open Plan Office”, Internoise 2014, 43rd International Congress on Noise Control Engineering November 16-19, 2014, Melbourne, Australia
  42. Utami, Sentagi Sesotya, Sarwono, Joko, Al Rochmadi, Nurwachid , Suheri, Nanan, “Speech Privacy and Intelligibility in Open-Plan Offices as an Impact of Sound-Field Diffuseness”, Internoise 2014, 43rd International Congress on Noise Control Engineering November 16-19, 2014, Melbourne, Australia
  43. Nitidara, Ni Putu Amanda, Sarwono, JokoMerthayasa, I G Nyoman, “Psychoacoustic analysis of preference reverberation time for Gamelan Bali Concert Hall”, Internoise 2014, 43rd International Congress on Noise Control Engineering November 16-19, 2014, Melbourne, Australia
  44. Joko Sarwono, and Indra Sihar, “[Physical sciences] The Influence of Students Seating layouts to the Sound Diffusion of Universitys Classroom”, 5th ICMNS 2014, Institut Teknologi Bandung, 2-3 November 2014, Bandung, Indonesia
  45. Jaja Muhamad Jabar, Freddy Haryanto, Sarwono, JokoMerthayasa, I G Nyoman“[Physical sciences] Dose distribution of Brachy Seed I-125 in Phantom Homogen using EGSnrc Monte Carlo simulation”, 5th ICMNS 2014, Institut Teknologi Bandung, 2-3 November 2014, Bandung, Indonesia
  46. Nurwachid Al Rochmadi, Sentagi Sesotya Utami, Joko Sarwono“[Physical sciences] Analysis of the Influence of Sound Absorption, Distance Between Workstations, and Partitions to the Acoustics of Open-Plan Offices”, 5th ICMNS 2014, Institut Teknologi Bandung, 2-3 November 2014, Bandung, Indonesia
  47. Barus, R.P.P., Tjokronegoro, H.A., Leksono, E., Ismunandar, Nonlinear modelling of polymer electrolyte membrane fuel cell stack using nonlinear cancellation technique, AIP Conference Proceedings, 1617, pp. 71-74, 2014 (Scopus)
  48. Kadarsah Suryadi, “Knowledge Sharing Attempt of Doctors in Teaching Hospital Using Partial Least Squares (PLS) Analysis”, The 13th International Conference on Quality on Research in Conjunction with The 2nd International Conference on Civic Space
  49. Vincent F. Yu, Nur Mayke Eka Normasari, Candra Bachtiyar, Sukoyo, “Simulated Annealing for Green Vehicle Routing Problem”, 6th Internasional Conference on Operations and Supply Chain management, Bali, 2014, Indonesia. 10-12 Desember 2014, 103 – 111.
  50. Femi Yulianti, Senator Nur Bahagia, Andi Cakravastia, Rajesri Govindaraju,”Coordination Mechanism of Container Flow for Import Process: A Conceptual Model”, 6th Internasional Conference on Operations and Supply Chain management, Bali, 2014, Indonesia. 10-12 Desember 2014, 190 – 202.
  51. Suprayogi, Muhammad Nashir Ardiansyah, “On-Line Vehicle Routing Problem with Heterogeneous Vehicles, Time Windows and Road Network Constraints”, 6th Internasional Conference on Operations and Supply Chain management, Bali, 2014, Indonesia. 10-12 Desember 2014, 713 – 729.
  52. Suprayogi, Senator Nur Bahagia, Yudi Thaddeus, “Location Problem In A Supply Chain Network with Inbound and Outbound Product Flows”, 6th Internasional Conference on Operations and Supply Chain management, Bali, 2014, Indonesia. 10-12 Desember 2014, 1353 – 1363.
  53. Suprayogi, Andi Cakravastia, Aditya Pandu Wicaksono, “Genetic Algorithm for Solving a Helicopter Routing Problem”, 6th Internasional Conference on Operations and Supply Chain management, Bali, 2014, Indonesia. 10-12 Desember 2014, 1364 – 1377.
  54. Iwan I., Wiratmadja, Muhammad Akbar, Anas Ma’ruf, Nanda Rusyda Saufa, Rajesri Govindaraju, Indrayati Sunaryo, “Integrated Coal Gasification Technology Selection Model Considering Company’s Research & Development and Operation Decision Making“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 35 – 42.
  55. Dwi F.D. Nurcahya, Muhammad Akbar, Dradjad Irianto, “Assessing Technology Level of Industrial Estate to Meet Standard of Environment“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 43 – 49.
  56. Sukoyo, Patricia Racel R., Iwan I., Wiratmadja, “Development of Measurement Tool for Project Management Maturity (Case Study: A Coal Mining Company in Indonesia)“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 412 – 420.
  57. Sribagjawati Suparman, Iman Sudirman, Joko Siswanto, Sukoyo, “Identification Quality Management System Requirement for Creative Industries SME’s in Bandung“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 453 – 458.
  58. Suprayogi, Yosi A. Hidayat, Utamaningsih Linarti, “Competitive Facility Location Problem by Considering Conditions of Government Regulation and Regional Saturation“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1250 – 1255.
  59. Said Ibnu Abi Syahputra,  Anas Ma’ruf, “Multi-Jobs Lot Streaming to Minimize the Mean Maximum Completion Time in Multi-Stages Hybrid Flow Shop Scheduling“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1434 – 1441.
  60. Yosi Agustina Hidayat, Veronica Natasha Adelein, Lucia Diawati, “The Comparison between Perpetual and Periodic-Review Models for Fast-Moving Products in Convenience Store Distribution Center“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1547 – 1553.
  61. Muhammad Shodiq Abdul Khannan, Anas Ma’ruf, Rachmawati Wangsaputra, Sutrisno, “Cellular Manufacturing System Model under Demand Uncertainty“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1567 – 1574.
  62. Bobby Kurniawan, Anggoro Suryo Pramudyo, Didik Aribowo, Anas Ma’ruf, “Agent-based Real-time Scheduling for Smart Household Appliance“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1678 – 1682.
  63. Nita P. A. Hidayat, Andi Cakravastia, TMA Ari Samadhi, Abdul Hakim Halim, “A Batch-scheduling Problem to Minimize Total Actual Flowtime of Parts Through The Shop Which Has m Heterogenous Batch Processors“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 1701 – 1706.
  64. Devy Nurmala Sari, Anas Ma’ruf, “Flexible Jobshob Scheduling Problem with Alternative Routing and Processing Time as A Decision Variable Considering Cost of Production and Delay Simultaneously“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 2048 – 2054.
  65. Rinto Yusriki, Sukoyo, TMA Ari Samadhi, Abdul Hakim Halim, “Batch Scheduling for a Single Machine with Forgetting Effect to Minimize Total Actual Flow Time“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 2055 – 2060.
  66. Zahedi, TMA Ari Samadhi, Suprayogi, Abdul Hakim Halim, “Integration Batch Production and Maintenance Scheduling on a Deteriorating Machine to Minimize Production and Maintenance Cost in Just in Time Environment“, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014, October 12 – 15, 2014, Jeju, Korea. 2061 – 2069.
  67. Haq, I., N., Leksono E., Iqbal, M., Soelami, F.X.N., Kurniadi, D., Nugraha, Yuliarto B.Development of Battery Management System for Cell Monitoring an Protection, Proceedings of 2014 International Conference on Electrical Engineering and Computer Science, ICEECS 2014. 18 February 2014, Article number 7045246, Pages 203-208. 1st International Conference on Electrical Engineering and Computer Science, ICEECS 2014; Inna Grand Bali Beach SanurDenpasar; Indonesia; 24 November 2014 through 25 November 2014; Category numberCFP14A95-CDR; Code 111066
  68. Estiyanti Ekawati, Augie Widyotriatmo, Irfan Askandari, “Quadrotor position control on model identification and proportional-derivative algorithm”, Proceedings of 2014 2nd International Conference on Technology, Informatic, Management, Engineering and Environment, TIME-E 2014.
  69. Anna Antonyova, Peter Antony, Endra Joelianto, “Optimization the process of recycling the water contaminated with dispersion colorants”, Proceedings of 2014 2nd International Conference on Technology, Informatic, Management, Engineering and Environment, TIME-E 2014.
  70. Iwan Inrawan Wiratmadja, Indryati Sunaryo, Revina Novahestin Syafrian, Rajesri Govindaraju, “The Measurement of Humanware Readiness in a Technology Transfer Process:Case Study in an Electrical Machinery Company“, Proceedings of 2014 2nd International Conference on Technology, Informatics, TManagement, Engineering & Environment (TIME-E 2014).
  71. Tran,H.A.Q., Namatame,A., Widyotriatmo, A., Joelianto, E., “An optimization procedure for enhancing network robustness against cascading failures”, Proceeding of the 2014 7th IEEE Symposium on Computational Intelligence for Security and Defense Applications, CISDA 2014.
  72. Joko Siswanto, Anggi Maulida, “ERP Module Requirements for Micro, Small and Medium Enterprise Fashion Industry in Bandung”, Proceeding International Conference on Information Technology System and Innovation (ICITSI) 2014.
  73. Khoirul Muslim, Yassierli, “A We Based Occupational Health and Safety Management System Requirements In Small and Medium Enterprises”, Joint International Conference APCHI-Ergofuture-PEI-IAIFI 2014.
  74. Dian Palupi Restuputri, Yassierli, “The Development of Usability Essessment Tool For Airline E-Commerce Sites”, Joint International Conference APCHI-Ergofuture-PEI-IAIFI 2014.
  75. Andriani, M., Suryadi, K., Samadhi, A., Siswanto, J., Theoretical model of knowledge management in SMEs life cycle: (A literature study), Proceedings of 2014 2nd International Conference on Technology, Informatics, Management, Engineering and Environment, TIME-E 2014, 7011645, pp. 351-356
  76. Sumari, A.D.W., Mariani, S., Dewi, R.G., Promoting geothermal for energy security (A case of Indonesia), 2014 2nd International Conference on Technology, Informatics, Management, Engineering and Environment, TIME-E 2014; The Trans Luxury Hotel BandungBandung; Indonesia; 19 August 2014 through 21 August 2014; Category numberCFP1464U-ART; Code 110166 (Scopus)
  77. Budhi, Y.W., Devianto, H., Mahardhika, F.,Ignacia, L., Mikhael, H.A., Fluid dynamics and kinetic simulation for steam reforming of ethanol using a microchannel reactor, Proceedings of 2014 International Conference on Electrical Engineering and Computer Science, ICEECS 2014, 7045225, pp. 85-90, 2014, (Scopus)
  78. Yudhistira, T., Simatupang, T., Utilization Potency Analysis of Online Survey in Indonesia. Proceedings 2014 International Conference on Business and Social Science, Tokyo, Japan, 2014
  79. Sebrina, Diawati, L., Quantifying the transferee’s technology mastering level by considering indigenous capability and technology transfer, CIE 2014 – 44th International Conference on Computers and Industrial Engineering and IMSS 2014 – 9th International Symposium on Intelligent Manufacturing and Service Systems, Joint International Symposium on “The Social Impacts of Developments in Information, Manufacturing and Service Systems” – Proceedings pp. 706-716, 2014 (Scopus)
  80. Hidayat, Y.A., Diawati, L., Thaddeus, Y., Sumargo, S., 3-Echelon distribution policy with order flexibility and direct ordering system, IEEE International Conference on Industrial Engineering and Engineering Management 6962542, pp. 901-905, 2014 (Scopus)
  81. Hidayat, Y.A., Layadi, V.N.A, and Diawati, L., The Evaluation of Inventory Policy of PKM (Maximum Quantity Determination) in a Distribution Center, Proceedings of the 2014 2nd International Conference on Technology, Informatics, Management, Engineering and Environment ,  TIME-E 2014, 7011585, pp. 19-23 (Scopus)
  82. Hidayat, Y.A., Sebrina, Ardiansyah, M. N., and Sembada, W.J., Integrated Model of Two-Echelon Inventory System Considering Lead Time Acceleration and Component Commonality, World Congress on Engineering (WCE) 2014, London, U.K, 2-4 July 2014.
  83. Mangkuharjo, G., Hidayat, Y, A., and Wee, H. M., Solving EOQ Problem With Quantity Discount and Finite Planning Horizon. Proceeding of the 2014 International Conference on Service Science and Innovation (ICSSI). National Taiwan University of Science and Technology, Taipei, 4-6 June 2014, pp. 75.
  84. Wang, K.J., Fatma, E., and Hidayat, Y.A., Modelling R&D Coopetition of Firms in High Technology Industry. Service Science and Innovation (ICSSI), 2014 Sixth International Conference, Taipei, Taiwan, 4-6 June 2014, pp. 82.
  85. Nurwulan, N.R., Iridiastadi, H., Jiang, B.C. , A review of the effect on postural stability while using mobile phone, Bridging Research and Good Practices towards Patient Welfare – Proceedings of the 4th International Conference on HealthCare Systems Ergonomics and Patient Safety, HEPS 2014 pp. 101-108 (Scopus)
  86. Aisyah Shalih Mardhotillah, Joko Siswanto, “Performance Indicators Identification and Performance Dashboard Model Development for State-Owned Mining Companies in Indonesia“, The 15th APIEMS 2014, 12-15 Oktober 2014, Jeju-Korea, (http;//www.apiems2014.org)
  87. Dea Putri, Joko Siswanto,  “Credit Scoring Model for Creditworthiness Estimation of SMEs in Indonesia“, The 15th APIEMS 2014, 12-15 Oktober 2014, Jeju-Korea, (http;//www.apiems2014.org)