Prosiding Internasional 2010

  1. Hendro Risdianto, Elis Sofianti, Suraya, Sri Harjati Suhardi, Tjandra Setiadi, ‘The Influence of Carbon Sources on Laccase Production by White Rot Fungus Marasmius sp. in Solid State Fermentation’, Proceedings ASEAN-Korea Symposium and Workshop on Biorefinery Technology for Sustainable Production of Biofuel and Industrial Biochemicals, February 18-20, 2010.
  2. R. Rochmadi, I. Ciptaraharja, Tjandra Setiadi, ‘Evaluation of Decentralized Wastewater Treatment Plants in Four Provinces in Indonesia’, Decentralized Wastewater Treatment Solutions in Developing Countries Conference and Exhibition, Surabaya – Indonesia, 23-26 March 2010, Technical Options, IWA 2801.
  3. Tjandra Setiadi, ‘Indonesia Adaptation Strategies to Climate Change on Water Sector’, 10th Science Council of Asia (SCA) Conference, Manila – Republic of the Philippines, 14-17 June 2010.
  4. Rinaldi. M. Rachma, Vincentius Reinaldo, Ahyat Muhyinsyah, Tjandra Setiadi, ‘Electricity Generation from Tapioca Wastewater using a Microbial Fuel Cell (MFC)’, 7th European Congress of Chemical Engineering 7 & 19th International Congress of Chemical and Process Engineering CHISA 2010, Prague – Czech Republic, 28 August – 1 September 2010.
  5. Hendro Risdianto, Sri Harjati Suhardi, Tjandra Setiadi, Takao Kokugan, ‘The Influence of Temperature on Laccase Production in Solid State Fermentation by Using White Rot Fungus Marasmius sp’. Proceeding of The 1st International Sminar on Fundamental and Application of Chemical Engineering. Bali 3 – 4 November 2010.
  6. Hendro Risdianto, Elis Sofianti, Sri Harjati Suhardi, Tjandra Setiadi. ‘The optimization of laccase production using white rot fungi and agriculture waste in solid state fermentation’. Proceeding of 17th Regional Symposium on Chemical Engineering (RSCE) 2010. Bangkok 22-23 November 2010
  7. Rety Setyawaty, Tjandra Setiadi, Keiko Katayama-Hirayama, ‘Production of Biodegradable Plastics (Polyhydroxyalkanoates) Using Tapioca Industrial Wastewater: An Indonesian Case’, International Academic Hub for River Basin Research, Poster Session, Nov. 29th, 2010, University Yamanashi, Yamanashi, Japan
  8. Tomy Agustinus Ferdian, Aldrian Reza and Tjandra Setiadi. ‘Membrane Bioreactor Performance in Textile Wastewater Treatment: Evaluation of Laboratory and Plant Scale’. Proceeding of The 8th International Conference on Membrane Science and Technology (MST 2010). Bandung, 30 November – 1 Desember 2010.
  9. Bambang Sunendar Purwasasmita, Khalifa Aldila Putra and Leanddas Nurdiwijayanto, “The Use of Red Mud as Waste Product of Aluminum Prodution form Bauxite for Ceramic Coating on Steel as Surface Modification to Improve Mechanical and Chemical Properties”, Proceedings 3rd Regional Conference Interdisciplinary on Natural Resources and Materials Engineering, 25th September 2010
  10. Angela Evelyna, Bambang Sunendar Purwasasmita, Nina Djustiana, Zulia Hasratiningsih, “Self Sysnthesis Al-Si-Zr Nanoparticle Filler and It’s Microstructure Characterization for resin Dental Restorative dental Material”, Proceedings Balikpapan International Dental Exhibition 2010
  11. Tjandra Setiadi, “Electricity generation from tapioca wastewater using a microbial fuel cell (MFCs)”, Proceedings 7th European Congres of Chemical Engineering and 19th International Congress of Chemical and Process Engineering CHISA 2010, 28 Agustus s.d 1 September 2010 di Prague, Czeh Republic
  12. Brian Yuliarto, Fahiem Fanani, M. Kasyful Fuadi, and Nugraha, “Preparation of Nanoporous TiO2 for Cye-Sensitized Solar Cell Using Various Dyes”, The 3rd Nanoscience & Nanotechnology Symposium, Bandung 2010 (NNSB2010), An International Symposium on Nanoscience and Nanotechnology, Bandung Institute of Technology, June 16, 2010
  13. Brian Yuliarto, Muhammad Iqbal, Sri Julia, and Nugraha, “Fabrication and Characterization of Nanostructure Zinc Oxide for LP Gas Sensor”, The 3rd Nanoscience & Nanotechnology Symposium, Bandung 2010 (NNSB2010), An International Symposium on Nanoscience and Nanotechnology, Bandung Institute of Technology, June 16, 2010
  14. Sri Julia, Brian Yuliarto, Nugraha, “Synthesis of Various Nano Pattern of ZnO Using Sol Gel Method”, The 3rd Nanoscience & Nanotechnology Symposium, Bandung 2010 (NNSB2010), An International Symposium on Nanoscience and Nanotechnology, Bandung Institute of Technology, June 16, 2010
  15. Evan Kamaratul Insani, Van H. Nguyen, Go Kawamura, Jun-ichi Hamagami, Mototsugu Sakai, Atsunori Matsuda, Brian Yuliarto, “Proton Conductivity of CsH2PO4 – WPA Composites at Intermediate Temperature”, The 3rd Nanoscience & Nanotechnology Symposium, Bandung 2010 (NNSB2010), An International Symposium on Nanoscience and Nanotechnology, Bandung Institute of Technology, June 16, 2010
  16. Nugroho Pratomo Ariyanto, Huda abdullah, Brian Yuliarto, Syarif Junaidi, Yap Chi Chin, Muhammad Yahya, Sahbudin Shaari, “Fabrication and Characterization of Flower-like Zinc Oxide for Dye-Sensitized Solar Cell Phoanode”, Proceedings of 2nd WSEAS International Conference on Nanotechnology, February 20-22, 2010, Cambridge, United Kingdom
  17. Nugroho Pratomo Ariyanto, Huda abdullah, Syarif Junaidi, Brian Yuliarto, Sahbudin Shaari, “Fabrication of Zinc Oxide-based Dye-Sensitized Solar Cell by Chmemical Bath Deposition”, Proceedings of International Conference on Functional Materials Devices 2010, 13-17 June 2010, Trengganu Malaysia
  18. Bermawi P. Iskandar, “Two New Servicing Strategies for Products Sold with One- Dimensional Warranties”, The 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM 2010), 2-4 Desember 2010, Victoria University of Wellington, New Zealand
  19. Hermawan K. Dipojono, Adhitya G. Saputro, Triati D. K. Wungu, Handoko S. Kuncoro, Rahmar Gunawan, Cynthia L. Radiman, Muhammad A. Martoprawiro, Melanie david, Hideaki Kasai, “DFT-Based Calculations for Progressive Search of New Functional Materials Through Computational Materials Design“, International Conference on Materials Science and Technology (ICMST 2010), 19-23 October 2010, Puspiptek Serpong Tangerang, Indonesia
  20. Putri,N.T., Yusof, S.M., Drajad Irianto, “Factors affecting Effectiveness of Quality Engineering Implementation in Malaysia and Indonesian Automotive Industries – Delphic Hoerarchy Process Methodology”, Proceedings World Engineering Congress 2010, Kuching Malaysia.
  21. Hardianto Iridiastadi, “Aerobic Capacity and Oxygen Consumption Prediction Equations for Indonesia Young Adults”, First Southeast Asia Network of Ergonomics Societies Conference (SEANES 2010), Cebu, Philipina 14-17 December 2010.
  22. Akhmad Zainal Abidin, Irwan Noezar and Rhidhawati, ”Synthesis and Characterization of Superabsorbent Polymer Composites Based on Acrylic Acid, Acrylamide and Bentonite”, International Conference on Materials Science and Technology (ICMST 2010), 19-23 October 2010, Puspiptek Serpong Tangerang, Indonesia
  23. Abraham H Prasetya, Angga Prasetya and Akhmad Zainal Abidin , “Solar Powered Water Pump : Stirling Engine Design and Feformance Evaluation of Solar Cooker”, ICCHT2010 – 5th International Conference on Cooling and Heating Technologies. Bandung, Indonesia 9- 11 December 2010
  24. Joko Sarwono, FX. Nugroho Soelami, and D. Arinanda, “Integrated Lighting Luminaires- Acoustics Diffusor for Classroom”, proceedings of 20th ICA, Sydney, Australia, 23-27 August 2010
  25. Joko Sarwono, Suprijanto, and M.I. Mandasari, “Forensic Speaker Identification: an experience in Indonesian court”, proceedings of 20th ICA, Sydney, Australia, 23-27 August 2010
  26. Hakim, F.A., Mandasari, M.I., Joko Sarwono, “Acoustic speech analysis of wayang golek puppeteer”, (2010) AIP Conference Proceedings, 1325, pp. 316-318.
  27. Drajad Irianto, “In-Process Correction Systems in a Small Repetitive Manufacturing Enterprise”, Prosiding ICIEBM conference, Oct. 2010.
  28. Drajad Irianto, “Constructing Context: A Three Dimensions of Change in Quality Management Implementation”, Prosiding APIEMS conference, Dec 2010.